Thermal Spray Powders - Sentes-BIR
Nickel Based Gas Atomized Powders for Hand Spray & Fuseweld
Brand | Hardness | Application |
---|---|---|
Fortecoat 9120 | 14-18 HRC | Coating on parting lines for glass moulds |
Fortecoat 9125 | 23-27 HRC | Coating on full/part for glass moulds, pump and compressor construction |
Fortecoat 9127 | 23-27 HRC | Coating on full/part for glass moulds, pump and compressor construction |
Fortecoat 9130 | 28-32 HRC | Neckring for small glass moulds, Narrow neck Plunger |
Fortecoat 9134 | 32-36 HRC | Neckring for small/big glass moulds, pump and compressor construction |
Nickel Based Gas Atomized Powders for HVOF & Plasma Spray
Brand | AWS Class | Hardness | Application |
---|---|---|---|
Fortecoat 9045 | Type-NiCr-B | 36-40 HRC | Attain wear, corrosion, erosion, heat and abrasion- resistant in the chemical, petrochemical, textile, paper and automotive industry |
Fortecoat 9053 | Type-NiCr-B | 47-53 HRC | |
Fortecoat 9056 | Type-NiCr-B | 52-58 HRC | |
Fortecoat 9062 | Type-NiCr-B | 57-62 HRC |
Cobalt Based Gas Atomized Powders (PTA, Laser, Laser Cladding & HVOF)
Brand | AWS Class Type | Hardness | Application |
---|---|---|---|
Fortecoat 42001 | Type – ERCoCr-C | 52-58 HRC | Used for pump sleeves, rotary sealrings, and wear pads, bearing sleeves, extruder screw flights |
Fortecoat 42006 | Type – ERCoCr-A | 40-44 HRC | Good impact conditions. Good impact resistance. Valve seats and gates; pump shafts and bearings, erosion shields and rolling couples |
Fortecoat 42012 | Type – ERCoCr-B | 47-51 HRC | Widely used as cutting edge in textile, timber and plastics industries and for bearings |
Fortecoat 42021 | Type – ERCoCr-E | 28-40 HRC | Applications involving erosion, high temperatures and corrosion. Valve trim for high pressure steam, oil and petrochemical |
Fortecoat 42000F | Type – ERCoCr-F | 42-46 HRC | Used primarily for deposition on closing face of poppet valves for internal combustion engines |
Gas Atomized Additive Manufacturing (AM) Powders (LPBF, EBPBF and DED)
Brand | Alloy Type | Application |
---|---|---|
PURESPHERE 43055 PURESPHERE 43024 PURESPHERE 43075 | Cobalt – based powders for dental restoration | Crowns, Bridges, Partial Dentures, Small tooth-supported frames |
PURESPHERE 43024 | Nickel – based powders | for dental restoration |
Inconel 718
Inconel 625 Hastelloy X |
Nickel Super Alloy Powders | Turbine Blades, Turbine Discs, Turbochargers, Melt Processing, Casting of Blades |
Pure Cu, OFHC Cu
CuSn binary CuCrNiSi CuNiSi CuCrZr CuCrNb |
Copper and Copper-alloy Powders | Automotive industry to manufacture a variety of vehicle parts, Thermal management devices |
AlSi10Mg | Aluminium Alloy Powders | Aerospace & automotive, housings, ductwork, production tools, and engine parts |
Ti- 6Al-4V Grade 5
Ti- 6Al-4V Grade 23 |
Titanium alloy Powders | Aircraft ducting, hydraulic, tubing, Airframe components, Automotive components, Ballistic Armor, Gas turbine engine components, Landing gear components, Navy ship components, Hydrocarbon production / drilling, Space vehicles / structures, missile components Medical implants / devices, surgical instruments, Airframe components, Ballistic armour, Space vehicles / structures, missile components |
Co-6, Co-21 CoCrMo/F75 CoCrWMo Dental | Cobalt alloy powders | Gas turbines, Orthopaedic implants, , Components for aircraft engines and components for engine construction Dental implants Special Dental Applications |
Tungsten Carbide Powders (PTA, Laser Cladding & HVOF)
Grade | Industry | Application |
---|---|---|
WC + NiCrBSi | Process, Chemical, Foundry, Engineering, Oil & Gas | Runners, Wear Parts, Landing Gear, Valves etc. |
Tungsten Carbide Chromium Powder (88:12) Tungsten Cobalt Chromium (86:10:4) |
Hydel, Engineering, Steel, Mining, Oil & Gas, Aviation etc. |
Thermal Spray Powders - PAC
MCrAlY Powders HOVF, PTA, Laser Spray, Laser Cladding and Additive MFG
Nickel Base | ||
PAC Alloy # | Material Composition | Application |
---|---|---|
4610 | Ni-Cr-AI-Co-Yttria | Self-bonding coatings -Can be used for oxidation and corrosion resistant applications at temperatures up to 9800 C |
8239 | Ni-17Cr-12AI-23Co-.5Y | Used in Turbine Blades |
8246 | Ni-20Cr-8.5AI-23Co-.6Y-4Ta | Used in stationary gas turbine applications |
9242AMF | NiCrAlY+TA Re HF Si | Product data available through OEM |
9620AM | Ni-22Cr-10AI-1Y | Used in Turbine Blades |
9640AM | Ni-31Cr-11AI-.6Y | Used as Bond Coats for TBCs |
Cobalt Base | ||
PAC Alloy # | Material Composition | Application |
9950AMF | Co-32Ni-21Cr-8AI-.5Y | Typically used for either a TBC bond coat or an environmental protection coating |
9290AMF | Co-29Cr-6AI.3Y | |
9330AM | Proprietary CoNiCrAIY | Product data available through OEM |
Iron Based MCrAlY | ||
PAC Alloy # | Material Composition | Application |
---|---|---|
9970AM | Fe-24Cr-8AI-.5Y | Oxidation and hot corrosion resistance of industrial gas turbines (IGT) components such turbine buckets, blades, shrouds |
Aluminium Base | ||
PAC Alloy # | Material Composition | Application |
---|---|---|
19NS | Pure Aluminium | Repair of Al- and Mg-based parts |
901 | 88-12Si | Turbine engine abradable-gas path seal coating |
Copper Base | ||
PAC Alloy # | Material Composition | Application |
10 | Pure Cooper | Due to excellent electrical and thermal conductivities it used in the electrical and the electronics industries |
12 | Cu-38Ni | Protects against fretting and galling |
16 | Cu-9.5 Al-1Fe | Suitable for low temperature applications to produce surfaces where moderate oxidation, wear and cavitation resistance is needed |
658C | Cu-36.5 Ni-5In | Excellent anti-fretting coating |
Titanium Base | ||
PAC Alloy # | Material Composition | Application |
---|---|---|
Ti- 6Al-4V Grade 5 | Ti Grade 5 | Aircraft ducting, hydraulic, tubing, Airframe components, Automotive components, Ballistic Armor, Gas turbine engine components, Landing gear components, Navy ship components |
Ti- 6Al-4V Grade 23 | Ti Grade 23 | Medical implants/devices, surgical instruments, Airframe components |